skip to Main Content
+36 77/595-300 tooltechnik@tooltechnik.hu
Fruit pitting machine

The universal fruit pitting machine with interchangeable adapters and additional components is suitable for pitting of all kind of stone-core fruit undamaged: plum, greengage, apricot, cherry, sour cherry, small sour cherry, mirabolan. With the optional built-in halving knife the parting of the fruits can be done immediately!

Stoning performance
plum2.000 kg/h(50 hole tray, with bisecting)
greengage2.000 kg/h(30 hole tray, with bisecting)
mirabolan1.800 kg/h(50 hole tray)
cherry400-700 kg/h(77 hole tray)
sour cherry1.000 kg/h(77 hole tray)
small sour cherry1.600 kg/h(108 hole tray)
apricot2.000 kg/h(17 hole tray, with bisecting)
Dimensions
length3.020 mm (without vibrating table: 2.800 mm)
width1.360 mm
height1.700 mm
mass1.800 kg
Electrical properties
nominal mains voltage3/N/PE/230/400 V, 50 Hz
nominal power3,7 kW
nominal current8 A
Fruit pitting machine | cherry pitting - Tooltechnik
Fruit destalker / stem remover

The stem remover is a newly developed equipment for the fruit processing industry. This machine is facilitate and expedite the preparation of the fruit before processing. Suitable for sour cherries and cherries.

Properties
performance500-1.600 kg/h (depending on fruit type)
shredder quantity40
Electrical properties
power3 kW
mains voltage3x400V,N,PE/50Hz
Water supply
connectionR3/8″
water consumption0,5 m3/h
pressuremax. 2 bar
Dimensions
length2.552 mm
width1.098 mm
height1.672 mm
mass388 kg
Other properties
protectionIP55/EN 60529
Cherry destalking | stem removing machine - Tooltechnik
Back To Top