skip to Main Content
+36 77/595-300 tooltechnik@tooltechnik.hu
Fruit pitting machine

The universal fruit pitting machine with interchangeable adapters and additional components is suitable for pitting of all kind of stone-core fruit undamaged: plum, greengage, apricot, cherry, sour cherry, small sour cherry, mirabolan. With the optional built-in halving knife the parting of the fruits can be done immediately!

Stoning performance
plum2.000 kg/h(50 hole tray, with bisecting)
greengage2.000 kg/h(30 hole tray, with bisecting)
mirabolan1.800 kg/h(50 hole tray)
cherry400-700 kg/h(77 hole tray)
sour cherry1.000 kg/h(77 hole tray)
small sour cherry1.600 kg/h(108 hole tray)
apricot2.000 kg/h(17 hole tray, with bisecting)
Dimensions
length3.020 mm (without vibrating table: 2.800 mm)
width1.360 mm
height1.700 mm
mass1.800 kg
Electrical properties
nominal mains voltage3/N/PE/230/400 V, 50 Hz
nominal power3,7 kW
nominal current8 A
Fruit pitting machine | cherry pitting - Tooltechnik
Fruit destalker / stem remover

The stem remover is a newly developed equipment for the fruit processing industry. This machine is facilitate and expedite the preparation of the fruit before processing. Suitable for sour cherries and cherries.

Properties
performance500-1.600 kg/h (depending on fruit type)
shredder quantity40
Electrical properties
power3 kW
mains voltage3x400V,N,PE/50Hz
Water supply
connectionR3/8″
water consumption0,5 m3/h
pressuremax. 2 bar
Dimensions
length2.552 mm
width1.098 mm
height1.672 mm
mass388 kg
Other properties
protectionIP55/EN 60529
Cherry destalking | stem removing machine - Tooltechnik
Aftermarket replacement and spare parts

Our company undertakes the production of aftermarket replacement and spare parts for fruit pitting and destemming machines, which are compatible with the machines available on the market. These remanufactured parts include mechanical wear parts and special adapters for each fruit variety, as well as individual components required for the processing. The parts are manufactured individually according to the customer’s needs, with a short lead time.

Back To Top
×
Show